|
VRay for Rhino Manual
Before you Start Rendering with V-Ray for Rhino
When rendering an image with any rendering program, including V-Ray for Rhino,
you must understand three main factors that will affect the image: Lighting,
Materials, and Mapping. Lighting plays the most important role among these
three. It will affect the color, shadow, reflection and refraction among every
single object in the scene.
V-Ray for Rhino is a rendering engine equipped with Global Illumination (GI),
which helps the users setup the lighting for entire scene easily. So they don't
have to spend a lot of time adjusting lighting location and brightness.
The concept of GI is very simple. Imagine a room has a window but no light in
it. The natural light from the outside of the room comes in through the window
so the room doesn't look completely dark even though there is no light in it.
Some people even call this the “lazy boy lighting”. Its purpose is allowing the
users have the most natural light possible but without spending too much of time
to achieve it.
V-Ray for Rhino also supports High Dynamic Range values, also called HDRI
(High Dynamic Range Image). With a normal 24bit, 8bit per channel RGB image (Low
Dynamic Range Image), the brightest white color you can get is R255, G255 and
B255. But this is still thousands times lower than what the sun light can
produce. With the HDR file format, users can have more control ranging from dark
to bright. The HDR is a very special image file format. It usually starts with
professional 360 degree photography, then transforms to 96bit full scene image
by using professional HDR software. The benefit of using HDR is that you can use
this full scene image as your render light source. It also can be used as the
back ground rendering.
V-Ray for Rhino also supports regular image file formats as light source for
GI. However, it is still limited when using HDR image format to describe the
lighting environment. Together with other regular image file format simulated
lighting environments, it usually being used only as supporting lighting for the
entire scene. That means adjusting the setting of major light sources is still a
very important work in V-Ray for Rhino. We will discuss more about how to use
lighting, materials and mapping later.
| 
